Description
News for the 2025 model
- change in aluminum used to 6066 T6/T7 with hydroforming with a reduction in spring rate by 8% compared to 2024 (the bike returns to its original position faster after load)
- new aggressive modern design
- tube routing through the frame change in the shape of the
- tubes for higher rigidity and adjustment
Main advantages
- matte aluminum processing
- modified head tube with a height of 120mm and with an integrated headset
- solid axle on the front and rear wheel, which extremely increases the strength and rigidity of the bike
- tapered head tube with an expanded lower diameter of 1.5″
- asymmetrically placed down tube that absorbs stress when pedaling / jumping on the chain side
- hydroformed tubes and a solid frame structure that remains rigid for a very long time!
- bearings located directly in the frame – ATTENTION NOT COMPATIBLE WITH OLDER TYPE OF BEARINGS!
- for M12 x 1.5 axles (thread x pitch) – ATTENTION NOT COMPATIBLE WITH OLDER 1.75 AXLE!
Geometry
- Length(front to rear wheel axle):
- Size S= 1060mm
- Size M= 1070mm
- Size L= 1080mm
- Rear chainstay length= 380mm
- Center height (above hub axle)= +65mm
- Head tube angle= 72°
- Head height= 120
Weight: unknown – will be measured
Reviews
There are no reviews yet.